Chaney 00913 UV Monitor

The Chaney 00913 UV Sensor is a pocket-size precision instrument that monitors harmful ultraviolet (UV) rays from the sun that can cause sunburn, skin cancer, and other related ailments. This sensor is especially recommended for children, people of any age with sensitive skin, and outdoor enthusiasts. The sensor calculates the recommended safe exposure time based on the SPF level of the suntan lotion used, the skin type, and the current intensity of the UV rays. This time is displayed by the sensor's integral countdown timer. As time passes, the UV sensor automatically readjusts the recommended exposure time based on time-of-day UV levels. When 1 minute of exposure time is left on the timer, the sensor beeps to let you know.

The Chaney 00913 UV Sensor precisely monitors the sun's harmful ultraviolet (UV) rays to help you avoid sunburn or worse. You enter the SPF level of your suntan lotion and your skin type and then place the sensor in the sun. The sensor calculates your recommended safe exposure time and displays it on an integral countdown timer. As time passes and UV levels change, the sensor automatically readjusts the exposure time. When 1 minute of exposure time remains on the timer, the sensor beeps. For children, folks with sensitive skin, and anyone who spends a lot of time outdoors, the 00913 can be a real help in avoiding excessive UV exposure and the possible resultant skin problems.

The Chaney 00913 UV Sensor is really easy to program and use. After you press the Power button to turn the sensor on, three simple steps are all it takes. First, you enter the SPF level of the suntan lotion you're using. Second, you enter your skin type from the four types listed in the instructions and also on the back of the sensor. Third, you place the sensor in a sunny area with the small round sensor window above the LCD panel facing the sun. The 00913 will detect the intensity of the UV rays and calculate, display, and count down your recommended exposure time.

The sensor displays - - : - - at the top of the LCD panel until the UV measurement is complete, at which time a numeric reading appears in the UV area. You then see the recommended exposure time displayed at the top of the LCD panel. This time may flash for a short period. When the time is displayed steadily, the exposure time countdown starts.

The sensor displays the time either as hours and minutes or as minutes and seconds, as appropriate. If the colon (:) between the numbers is flashing and the numbers to the right of the colon are not counting down rapidly, the display is hours and minutes. If the colon is displayed steadily and the digits to the right of the colon are counting down quickly, the display is minutes and seconds. If you see the time flashing or changing later, the sensor is readjusting the exposure time based on a change in the UV level. You'll hear an audible beep when 1 minute of exposure time remains.

Please be aware that the displayed UV level will change under natural environmental conditions, so don't try to change this reading. Variations in the UV level are normal over time and as cloud conditions change.

The 00913 UV Sensor is powered by one CR2032 (3V) lithium battery, which is included and preinstalled. When you are not using the sensor, be sure to turn the power off to extend battery life. Also included with the sensor is a detachable lanyard so that you can wear the sensor around your neck if you wish.

Dimensions:

Height:
4 inches (102 mm)
Width:
2-5/8 inches (67 mm)
Thickness:
5/8 inch (16 mm)